Connector OBD2 Pinout Diagram | On Board Diagnostics



OBD or On-Board Diagnostics is a diagnosis system consisting of computer-based application used in cars, that monitors and does measurement related works for the car speed, mileage, fuel consumption, etc. It only the device that helps us to see the all the data in a display(may be analog or digital). It also work as the engine control unit or ECU that measures some vital parameters of the Engine. Basically it work as an interface between physical devices or sensors and programming devices. This diagnosis helps to monitor or take care of the health of the car. The warning lights, display or car dashboard also controlled by this OBD system.

You can see the OBD2 port near the driver dashboard. It is a 16 pin connector or port. Any mechanic or technician easily can find out the error code by connecting a special scan tool to this port. The code of the OBD port by manufacturer to manufacturer but using a special scan tool it is easy to read the actual code. Some ports of this OBD2 Connector is standard number and position for all the manufacturer. This standard port position helps to connect the scan tool easily.


Here, You can see the pinout diagram of OBD2 connector.

OBD2 Connector Pinout Diagram, OBD2 Pin Diagram, OBD2 port



Pin Details are here,

Pin No. 1 - This pin is not standard. The function of this pin is depend upon the manufacturer. For different versions it may have different functions.

Pin No. 2 - This pin is named as "SAE J1850 Bus+". This is the bus positive pin of the protocol. It is used by GM vehicles. This protocol uses PWM(Pulse Width Modulation) and VPW or Variable Pulse Width.

Pin No. 3 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 4 - Connected to Chassis Ground or Negative

Pin No. 5 - Connected to Serial Ground

Pin No. 6 - This pin is named as "CAN High". It is the high pin of the CAN protocol(ISO15765-4). It provides 1Mbps speed with a 2 wire system.

Pin No. 7 - This pin follows the asynchronous serial communication protocol ISO9141. This pin is for K Line.

Pin No. 8 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 9 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 10 - This pin is named as "SAE J1850 Bus-". This is the bus positive pin of the protocol. It also used by GM vehicles. This protocol uses PWM(Pulse Width Modulation) and VPW or Variable Pulse Width.

Pin No. 11 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 12 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 13 - This pin is not standard. The function of this pin is depend upon the manufacturer.

Pin No. 14 - This pin is named as "CAN Low". It is the low pin of the CAN protocol(ISO15765-4). It provides 1Mbps speed with a 2 wire system.

Pin No. 15 - This pin follows the asynchronous serial communication protocol ISO9141. This pin is for L Line.

Pin No. 16 - It is connected to the positive of the car battery.


Read Also: 

Thank you for visiting the website. keep visiting for more updates.

Connector OBD2 Pinout Diagram | On Board Diagnostics Connector OBD2 Pinout Diagram | On Board Diagnostics Reviewed by Author on December 06, 2021 Rating: 5
Powered by Blogger.